SWIMMING POOL PARTS
| Brand | ULTRA-Z |
|---|---|
| Manufacturer | ULTRA-Z |
| Colour | Blue |
| Item Weight | 120 kg |
| Product Dimensions | 90 x 70 x 120 cm; 120 Kilograms |
| Item part number | WATER-205 |
| Item Height | 120 Centimeters |
| Item Width | 70 Centimeters |
| Power source type | Corded Electric |
| Included Components | Sand media |
POOL FILTER
- 1. Filter :- Swimming Pool Sand Filter Normal position during operation of system
- 2. Backwash :- Position when operation system to purge filter of accumulated debris. This normally is necessary when filter pressure gauge read 10 PSI higher than starting pressure on s clear filter.
- 3. Rinse :- This position only used with sand filters and is designed to flush stray sand from system before returning to filter operation after back washing. 4. Closed :- Valve may be set in closed position when servicing filter tanks located below water level.
- 5. Re-Circulate :- This position permits pump to continue recirculation water (chemicals, heat, etc.) without flow through filter. this is advantageous when filter or its components are being repaired or replaced. 6.Waste :- This position permits draining or lowering of pool position, quickly move handle to another position to avoid air getting into pipe. 7.Winterizing :- This position is used to prevent from freezing. 8.Service :- The screw on the handle should be replaced while repairing.
- 9. Suitable with 1.0 hp Pump. Note :- Sand media is not included
INLETS
Product Specification
| Usage/Application | Swimming Pool |
| Shape | Round |
| Number Of Holes | 1 |
| Material | ABS |
| Color | White |
| Diameter | 40-50 mm |
| Flow Rate | 6000-6500 liter/Hr |
| Brand | Magline Pools |
Product Description
FILTRATION PUMP
For water circulation in swimming pool filtration system.
For clean and slight dirty water with solids in suspension.
The pump should be installed in an enclosed environment or sheltered from inclement weather.
Female threaded inlet/outlet available on request for SWIM series.
230V/60HZ, 110V/60HZ, 110V/50HZ are available on request for SWIM series.
Self priming 2-3m.
Handle available on request.
FS SERIES FILTER SYSTEM
The systems are designed for quick assembly and precise alignment of components
Both fiber glass filter and Plastic filter are available
6-position multiport valve : filter, backwash, rinse, waste, recirculation, closed
All models are one carton design
A heat pump is a device that can heat a building (or part of a building) by transferring thermal energy from the outside using the refrigeration cycle. Many heat pumps can also operate in the opposite direction, cooling the building by removing heat from the enclosed space and rejecting it outside. Units that only provide cooling are called air conditioners.
When in heating mode, a refrigerant at outside temperature is being compressed. As a result, the refrigerant becomes hot. This thermal energy can be transferred to an indoor unit. After being moved outdoors again, the refrigerant is decompressed — evaporated. It has lost some of its thermal energy and returns colder than the environment. It can now take up the surrounding energy from the air or from the ground before the process repeats. Compressors, fans, and pumps run with electric energy.
Common types are air source heat pumps, ground source heat pumps, water source heat pumps and exhaust air heat pumps. They are also used in district heating systems.